Packt Publishing – Building a RepRap 3D Printer

Packt Publishing – Building a RepRap 3D Printer

Build your own open source 3D printer over the weekend

Build your own open source 3D printer over the weekend

About This Video

Screw it together, wire it up, calibrate it, and print the world in 3D

Understand your 3D printer from inside out; tinker, play, modify, and experiment with it

Clear and professionally recorded videos that lead you directly to your goal and assist you in case things get difficult

In Detail

3D printers are designed to build solid three-dimensional objects of any shape using a digital model. This amazing technology will shape the future and as one of the first low-cost 3D Printers, RepRap have made this a democratic technology. RepRap stands for Replicating Rapid Prototyper, and the technology is capable of self-replicating most of its parts, which can then be used to build another RepRap printer. The open source movement made this revolution possible and you can be a part of it.

This video course teaches you how to make a 3D printer for yourself and calibrate and adjust it perfectly. You will get to know how to solve and prevent common problems and discover alternative solutions to tailor your 3D printer to your liking and needs. You will learn how to assemble parts for your 3D printer and build it with ordinary tools and skills. The course starts off with assembling of the Y-Unit and the XZ-Unit before moving on to the extruder and wiring. Next, you will be shown how to execute some simple calibrations and suddenly you’re printing in 3D with your very own 3D printer. By the end of the video, you will be a junior 3D printing expert. This 3D printer used for demonstration in this course is especially designed for easy assembly and use, and gives you a head start in building your own 3D-printers for now and for the future.

Get Packt Publishing – Building a RepRap 3D Printer At tenco.pro

Course Curriculum

Introduction

• Introduction to RepRap (4:20)
• How a 3D Printer Works (3:25)
• 3D Printing Workflow (3:17)
• Overview of the i3 Berlin 3D Printer Design (2:44)
• Tools and Parts (3:47)

Building the Y-unit

• Mounting the Threaded Rods and Power Supply (3:09)
• Mounting the Aluminium Plates and the Y-motor (3:04)
• Mounting the Y-carriage and the Timing Belt (3:01)
• Adjusting the Parallels (2:26)

Building the XZ-unit

• Mounting the X Axis (3:00)
• Mounting the Z Axis (3:02)
• Mounting the Timing Belt (3:07)

Wiring Up the 3D printer

• Wiring the Power Supply (4:10)
• Assembly of the Main Units (3:07)
• Wiring the Y-unit (3:32)
• Wiring the Z-unit (3:14)
• Wiring the X-unit and the Extruder (3:11)
• Wiring the HeatBed (3:09)

Calibrating the Printer

• Mount the End Stop Magnets and M5 Rods (3:16)
• Software and Communication (3:20)
• Assemble the Extruder (3:40)
• Test and Mount the Extruder (3:43)
• Calibrating the Movements of the Printer (4:30)
• Mount and Calibrate the Print Platform (4:03)

Print in 3D

• Filament and Printer Settings (3:07)
• Print Settings (3:07)
• First Layer (3:08)
• Dual Extrusion (3:13)
• Operate the 3D Printer (3:03)

Experiments and Alternatives

• Cura (3:36)
• Kisslicer (3:16)
• Filaments (3:13)
• Print Platform Surface (2:48)
• Extruders (3:06)
• The Future of Open Source 3D Printing (3:06)

Troubleshooting

• Software Issues in Windows, Mac, and Linux (3:06)
• Layer Shift (3:09)
• Oozing (3:06)
• Extruder Is Not Working (3:32)

Get Packt Publishing – Building a RepRap 3D Printer at tenco.pro